Skip to content
Glossary

What Is a Ball Valve?

A ball valve is a shutoff device that controls water flow with a round, drilled ball inside its body. Turning the handle rotates the ball so its opening lines up with the pipe or blocks the passage. Ball valves provide quick, full flow control on water supply lines and equipment connections.

Quick Facts About Ball Valve

Category

Water shutoff valve

Used for

Controlling water flow

Common confusion

Often confused with a gate valve

Also called

Ball shutoff valve

Often discussed with

Water Line Repair

Key Takeaways About Ball Valve

  • The round ball gives the valve a straight flow path.
  • A quarter-turn handle makes shutoff quick during water line work.
  • A ball valve is not the same as a gate valve.

How Ball Valve Works

Two men talk across a workbench while holding brass valve parts in a cluttered workshop

A ball valve controls water by turning a polished ball inside the valve body. The ball has a passage through its center. When the passage lines up with the pipe, water flows. When the handle turns across the pipe, the solid side stops the flow.

Related glossary terms: Gate Valve, Main Shutoff Valve, Water Shutoff Valve.

The handle position usually shows whether the valve is open or closed. A handle that follows the pipe signals an open path. A handle across the pipe signals a shutoff. Plumbers install ball valves with threaded, soldered, or compression connections. The correct connection must match the pipe and the job.

A water shutoff valve may serve a fixture or a larger section of the home. A ball valve works well where you need a clear, fast shutoff during water line repair.

A hand turns a red handle on a metal valve connected between braided and white pipes on a table

Expert Note

When we inspect a ball valve, we check the handle, valve body, and nearby connections for leaks or damage. We also operate the valve carefully to confirm that it opens and closes without binding. During water line repair, we verify that the shutoff isolates the right section before work begins.

Ball Valve in Practice: A Real-World Example

A damaged water line near a home's entry point may need a new ball valve. We can use the valve to stop water to that section while the line connection is repaired.

Related Terms

Gate Valve

Gate Valve is a shutoff device that controls water flow with a flat or wedge-shaped gate…

Main Shutoff Valve

Main Shutoff Valve is the control that stops water from entering a building through the main…

Water Shutoff Valve

A water shutoff valve is a plumbing control that stops water flow through a supply pipe…

Pressure Reducing Valve

Pressure Reducing Valve is a plumbing control that lowers incoming water pressure to a safer, steadier…

PlumbingMaplevalley.info

Have Questions About Ball Valve?

Contact PlumbingMaplevalley.info for practical guidance on Ball Valve and related plumber work in Maple Valley.

(425) 475-3519