Skip to content
Glossary

What Is a Cross-Connection?

A cross-connection is a physical link between a drinking water supply and another source that could affect water quality. The link may be intentional, such as a hose connection, or created by equipment, such as a boiler or irrigation system. Backflow through that link can move unwanted water into the supply.

Quick Facts About Cross-Connection

Category

Backflow risk point

Used for

Identifying possible water supply links

Common confusion

Confused with a backflow preventer

Often discussed with

Backflow Testing, Backflow Preventer Repair

Key Takeaways About Cross-Connection

  • A cross-connection links potable water with another water source.
  • Backflow can reverse the normal direction of flow.
  • A cross-connection is not the same as a backflow preventer.

How Cross-Connection Works

Hands connect a hose to a pipe beside a warning sign about cross-connection

A cross-connection gives water a path between a drinking water line and another source. Normal pressure keeps water moving toward fixtures and equipment. A pressure change can reverse that flow, which is called backflow.

Related glossary terms: Air Gap, Backwater Valve, Vacuum Breaker.

Plumbers look for these links during a backflow review. Common examples include hose bibs, irrigation equipment, heating systems, and tanks. A backflow preventer blocks or limits reverse flow at a connection. An air gap creates open space between the water outlet and the receiving vessel, so the two water sources do not touch.

The connection itself is the plumbing condition being checked. A prevention device is the part that helps control the resulting backflow risk.

A technician adjusts a brass valve assembly beside a laptop outdoors on gravel

Expert Note

When we inspect a plumbing system, we trace where drinking water connects to equipment or open fixtures. We check whether the connection could allow reverse flow and identify the control device at that point. Our backflow testing work focuses on whether the installed device responds as designed.

Cross-Connection in Practice: A Real-World Example

A hose remains attached to a hose bib while the hose rests in a bucket of treated water. That hose connection creates a cross-connection that a backflow review should identify.

Related Terms

Air Gap

An air gap is a physical break between a dishwasher drain hose and the drain connection…

Backwater Valve

A backwater valve is a sewer pipe fitting that helps stop wastewater from flowing backward into…

Vacuum Breaker

A Vacuum Breaker is a backflow prevention device that stops siphoning when water pressure drops. The…

Water Shutoff Valve

A water shutoff valve is a plumbing control that stops water flow through a supply pipe…

PlumbingMaplevalley.info

Have Questions About Cross-Connection?

Contact PlumbingMaplevalley.info for practical guidance on Cross-Connection and related plumber work in Maple Valley.

(425) 475-3519